News

  • Application of Road marking machine and nozzle selection

    Application of Road marking machine and nozzle selection

    Road marking machine is a kind of pavement construction machinery widely used in roads, high-grade highways, parking lots, squares and runways to mark different restrictions, guidelines and warnings on the flat ground. The marking machine has played a role in urban planning and highway constructi...
    Read more
  • Hydraulic airless sprayer uses a gas engine

    Hydraulic airless sprayer uses a gas engine

    The hydraulic pump draws hydraulic oil from a reservoir and pumps it to the hydraulic motor. The material pump of the Heavy duty units is driven by hydraulic motor This causes the hydraulic motor to reciprocate and power the fluid pump move up and down which will suck the paint and transfer the f...
    Read more
  • Maintenance of spray gun Chapter III

    Maintenance of spray gun Chapter III

    Some problems sometimes appear in the process of using the spray gun. Now we will analyze the phenomenon of the spray gun in detail, and according to the phenomenon, analyze the reasons and find out the solutions. Here are some common faults and solutions: fault reason solutions The air pres...
    Read more
  • Maintenance of spray gun Chapter II

    Maintenance of spray gun Chapter II

    Some problems sometimes appear in the process of using the spray gun. Now we will analyze the phenomenon of the spray gun in detail, and according to the phenomenon, analyze the reasons and find out the solutions. Here are some common faults and solutions: fault reason solutions Top weight ...
    Read more
  • Maintenance of spray gun:

    Maintenance of spray gun:

    Some problems sometimes appear in the process of using the spray gun. Now we will analyze the phenomenon of the spray gun in detail, and according to the phenomenon, analyze the reasons and find out the solutions. Here are some common faults and solutions: fault reason solutions Left or righ...
    Read more
  • Precautions for high pressure hose:

    Precautions for high pressure hose:

    The high-pressure hose can be manually connected or disconnected under high pressure, with compact structure and high working pressure. Precautions for high pressure hose: 1.high pressure hoses and hose assemblies that exceed the storage life or service life must be tested and identified before ...
    Read more
  • Maintenance method of spraying machine

    Maintenance method of spraying machine

    1.Maintenance of spray line and spray room. If the air supply system of the spray cabinet is blocked or there is too much dust, replace the air filter cotton, and open the back of the spray cabinet to clean the oil filter system in about three days. At the same time, it is also necessary to clean...
    Read more
  • Common causes of problems affecting nozzle spray

    Common causes of problems affecting nozzle spray

    The nozzle needs maintenance, regular inspection, cleaning and even replacement, so as to ensure the final product quality and maintain the economic benefits of the production process. The manner and frequency of the repair procedure depends on the application. The maintenance plan can be arrange...
    Read more
  • Spray Hose advantage

    Spray Hose advantage

    High pressure hose is an important power mechanical transmission product, which can support high-level water or air pressure. It is made of stronger materials than low-pressure hose (rubber and steel wire). High pressure spraying hose. The product is suitable for high-pressure spraying equipment....
    Read more
  • Operation of spray gun

    Operation of spray gun

    In the process of spraying, improper operation of the spray gun will affect the spraying effect of the product. A good spraying effect is as follows: 1. The coating is evenly distributed; 2. The coating cannot be too thick or too thin. The main points to be noted in the operation of the spray gun...
    Read more
  • How to choose spraying machine

    1.For powder spraying equipment, the performance of the equipment is mainly the powder feeding rate and powder feeding capacity. For the processing capacity of complex workpieces, this index is difficult for friends who come into contact for the first time to understand. We must carefully underst...
    Read more
  • What aspects should the spraying machine pay attention to in the coating process?

    What aspects should the spraying machine pay attention to in the coating process?

    Different types of coatings have different intervals. Xsprayer reminds you that during the construction period, you must carry out the construction according to each coating, such as brush coating, roll coating, high-pressure airless spraying, etc. here is a detailed introduction for you! First,...
    Read more